Hot Tel
13914077524
Product features
1. Integrated plastic molding with imported technology;
2. Simple and reasonable structure, stable and reliable performance;
3. It is very convenient for installation and use, and convenient for on-site mediation;
4. It can be used with various pumps, and is widely used for water supply and drainage and automatic control of liquid containing corrosion and suspended solids;
5. It can also be made into groups to facilitate multi-point control.
The basic components of DLFQL series liquid level switch controller are composed of floating ball, cable, rope, heavy hammer, etc. The reed tube sending unit or microswitch or mercury switch are all hidden in the sealed floating ball. The reed pipe is placed at the root of the floating ball, and the magnetic ring and the moving hammer are integrated, which can slide freely on the sliding pipe. When the top of the float is downward, the dynamic hammer slides to the top of the float, and the reed pipe is far away from the magnetic ring. At this time, the reed pipe is open; When the root of the float is downward, the dynamic hammer slides to the root of the float, the reed pipe is close to the magnetic ring, and the reed pipe is engaged.
Overall dimensions
Product features 1. Integrated plastic molding with imported technology; 2. Simple and reasonable structure, stable and reliable performance; 3. It is very convenient for installation and use, and convenient for on-site mediation; 4. It can be used with various pumps, and is widely used for water supply and drainage and automatic control of liquid containing corrosion and suspended solids; 5. It can also be made into groups to facilitate multi-point control. | technical parameter 1. Contact capacity: 10A/220VAC 2. Working temperature: freezing point of PP medium 80 ℃, freezing point of metal medium~180 ℃ 3. Rated current: 10A 4. Agreed heating current: 10A 5. Service life of switch: 1 million times 6. Cable length: 3M, 5M, 10M, different lengths can be customized | Selection Guide 1. The action length "a" of the floating ball must be less than the distance "A" between the floating ball and the wall, or it will cause incorrect action. 2. The lowest water level controlled by the float must be higher than the low water level of the pump to protect the pump. 3. The floating ball shall not be installed too close to the pump mouth. |
Tel：13914077524
Contacts：Manager Zhao
E-mail：zhaoyan@huaersheng.ntesmail.com
Add：Floor 2, Building 2, No. 188, Caijiabang Road, Wuzhong District, Suzhou City, Jiangsu Province
