Hot Tel
13914077524
Power supply: 220VAC, 110VAC, 24VDC
Power consumption: 3W
Contact capacity: AC 250V, 5A SPDT
Speed: 1R.P.M
Torque: 0.5~1.0kg cm
Working temperature: ordinary type: 60 ℃ High temperature type: ≤ 200 ℃
Electrical interface: M20 × 1.5 Internal thread
ZXW series anti rotation material level switch is applicable to the control of the material level in various open containers. The instrument adopts a special oil seal design, has double-layer dust prevention, and is equipped with a clutch device to protect the motor. It is reliable and easy to use and maintain. It is widely used in chemical, food, mining, plastic, ceramic and other industrial industries. It is an ideal simple material level control instrument.
The transmission shaft of the anti rotation material level switch is connected with the clutch. When the material level does not reach the blade height, the motor drives the blade to continue to rotate; When the material contacts the blade, the motor stops working and cuts off the power supply under the effect of blade damping. At the same time, the detection mechanism outputs a contact signal to determine the material level height.
| Overall dimensions | Shaft protection tube type | High temperature shaft protection tube type |
 |  |  |
| Main technical parameters | matters needing attention |
Power supply: 220VAC, 110VAC, 24VDC Power consumption: 3W Contact capacity: AC 250V, 5A SPDT Speed: 1R.P.M Torque: 0.5~1.0kg cm Working temperature: ordinary type: 60 ℃ High temperature type: ≤ 200 ℃ Electrical interface: M20 × 1.5 Internal thread | 1. It shall be installed away from the feed inlet; 2. When installing the block with particle diameter greater than 15mm or less than 7m from the lower part of the feed inlet, the probe cover shall be added; 3. When measuring the powder with high viscosity, it should be installed vertically from the upper part of the container or inserted obliquely from the side wall. 4. When the operating temperature of the probe exceeds 120 ℃, due to the shortened service life of the piezoelectric element, it is necessary to regularly check whether the switch action is normal. |
Model Selection Guide (ZXW Series)
Tel：13914077524
Contacts：Manager Zhao
E-mail：zhaoyan@huaersheng.ntesmail.com
Add：Floor 2, Building 2, No. 188, Caijiabang Road, Wuzhong District, Suzhou City, Jiangsu Province
