(Intrinsically safe) explosion-proof temperature transmitter is used to measure the temperature of the measured medium by using the characteristic that the resistance value of platinum resistance changes with the temperature and presents a certain functional relationship. The transmitter adopts imported platinum resistance with high performance and high reliability. After precise temperature and nonlinear compensation, it adopts modular signal processing technology with good performance to measure and calibrate the medium temperature and output industrial control standard signals. The product shell is made of all stainless steel, featuring small volume, fast thermal response, etc; The conductor is a special shielded conductor with a wide temperature range; The product is easy to install and has extremely high vibration and impact resistance.

Overall dimensions

Threaded interface

Thread code	C1:M2x1.5-6g	C2:G1/2
Dimension drawing Unit: mm
Recommended torque	15-25Nm	15-25Nm
Thread code	C4:M14x1.5	C7:NPT1/2
Dimension drawing Unit: mm
15-25Nm	15-25Nm

Note: Torque depends on various factors, such as gasket materials, supporting materials, screw lubrication and pressure

technical parameter

Range selection

matters needing attention:

1. During temperature measurement, the temperature measuring element shall reach thermal balance with the measured object.

2 The insertion depth shall be accurate.

3 Before installation, please read the product manual carefully and check the relevant information of the product.

4 Wiring shall be strictly in accordance with the wiring mode, otherwise product damage and other potential faults will be caused.

5 Incorrect use may cause danger and personal injury.